E-Layanan Sains BRIN | National Research and Innovation Agency

Advanced Characterization Transmission Electron Microscopy (TEM) Talos F200X

Paid

SERVICE DESCRIPTION | The Talos F200X TEM is a type of transmission electron microscope (TEM) that uses X-FEG (high brightness) as an electron source with an accelerating voltage that can currently work at 80 and 200 kV. This TEM is equipped with several detectors, including…

Laboratorium Imaging Fisika Maju
Puspiptek - Serpong
KST BJ Habibie Gedung 440-442 Laboratorium Imaging Fisika Maju Badan Riset dan Inovasi Nasional
08119811562
labkarserpong@brin.go.id

Service Unit: per contract
Service Duration: 21 Working Days
Service Quota Per Day: 8
Service Capacity: 1 per contract
Minimum Amount: 1

Marketing Office

Deputi Bidang Infrastruktur Riset dan Inovasi BRIN

layanan_sains@brin.go.id

The Talos F200X TEM is a type of transmission electron microscope (TEM) that uses X-FEG (high brightness) as an electron source with an accelerating voltage that can currently work at 80 and 200 kV. This TEM is equipped with several detectors, including a 16 M pixel Ceta CMOS camera for the process of taking TEM images digitally. Apart from that, this TEM is also equipped with several STEM detectors, including the Segmented Panther STEM detector (for BF and DF STEM) and the HAADF detector to carry out the capture process in STEM mode, both STEM images based on diffraction (BF and DF STEM), but based on composition. chemical elements contained in the sample. To complete this STEM image analysis, the Talos TEM has a Super-X EDS system (4 EDS detectors) to carry out EDS analysis of both spectrum, line scan, and EDS mapping.

Service options:

a. Imaging, Diffraction, HRTEM

b. STEM Imaging + EDS Spectrum

c. STEM Imaging, EDS Spectrum, and EDS Mapping

d. HRSTEM + EDS Mapping

Notes:

1. Before clicking Request a Service, please see the available SCHEDULE first.

2. To facilitate verification of registered test samples, customers must complete Form F-10 which can be downloaded in the "Service Files" section then select "Service SOP Files". Form F-10 that has been filled in. PDF format is uploaded along with Sample Photos in the "Other Supporting Files" and "Photo Data Files" sections.

3. Make sure that the NAME and NUMBER OF SAMPLES registered with ELSA are the same as the NUMBER OF SAMPLES written on Form F-10.

4. Incompleteness of these supporting documents may cause the test sample registration to be canceled by the Laboratory Management.

5. Refunds cannot be made unless there are technical problems at the Laboratory.

6. If the sample will be taken again. The maximum time limit for sampling is 1 month (30 working days) after the test has been completed.

Application Requirements: