Paid
SERVICE DESCRIPTION | SMC Inertial Motion Unit (IMU) -108 Inertial Motion Unit (IMU) SMC IMU-108 is a tool used to record ship attitude data starting from Roll, Pitch, Yaw, and Heave. The SMC IMU-108 can be used to support bathymetric surveys using a multibeam echosounder…
- Puspiptek - Serpong
Marketing Office
Deputi Bidang Infrastruktur Riset dan Inovasi BRIN
layanan_sains@brin.go.id
SMC Inertial Motion Unit (IMU) -108
Inertial Motion Unit (IMU) SMC IMU-108 is a tool used to record ship attitude data starting from Roll, Pitch, Yaw, and Heave. The SMC IMU-108 can be used to support bathymetric surveys using a multibeam echosounder or sub-bottom profiler survey. SMC IMU-108 is a type of subsea IMU that can be installed below sea level. So it is very appropriate to be installed near the transducer or on underwater equipment.
Brand:
SMC IMU-108 with Titanium Casing
Completeness:
Funtion:
Spesification
Fitur IMU-108
Roll / PitchYes
AccelerationsYes
HeaveYes
IMU-108 perform
Angle Accuracy static0.02° RMS
Angle Accuracy Dynamic
@ ±5° simultaneous roll and pitch0.03° RMS
Angle range Roll / Pitch± 30°
Heave Accuracy5cm or 5%
Acceleration accuracy0.01 m/s2 RMS
Comunication
Serial PortCom 1 : RS-232 Bi-Directional
Baud ratesSelectable (default 34800)
Output ratesSelectable 1- 200 Hz
ProtocolSelectable (default TSS1)
Other CommunicationSee the manual
Fisik
Dimensional (WxH)Ø134 x 127 mm exclude connector
Weight~1.5 kg
Housing materialTitanium
Environmental conditions
Operating temperature-20°C to +65°C, outside 0°C to +55°C, 0.1° angle performance
Storage temperature-40°C to +65°C
MTBF (mean time between failure, computed)50000 hours
Standard casingIP68,30 m depth rated
MountingHorizontal
Power Requirements
Power Requirements12 – 30 VDC, 3 W
Standard CompliesIEC 60945
Inertial Motion Unit (IMU) SMC IMU-108 is a tool used to record ship attitude data starting from Roll, Pitch, Yaw, and Heave. The SMC IMU-108 can be used to support bathymetric surveys using a multibeam echosounder or sub-bottom profiler survey. SMC IMU-108 is a type of subsea IMU that can be installed below sea level. So it is very appropriate to be installed near the transducer or on underwater equipment.
Brand:
SMC IMU-108 with Titanium Casing
Completeness:
- IMU 108 with Titanium Casing
- Interface box that has a subsea cable, serial cable, and power cable installed
Funtion:
- Motion sensor for application of the Active Heave crane system
- Motion sensors for various operations at sea that require attitude determination, motion compensation or dynamic positioning
Spesification
Fitur IMU-108
Roll / PitchYes
AccelerationsYes
HeaveYes
IMU-108 perform
Angle Accuracy static0.02° RMS
Angle Accuracy Dynamic
@ ±5° simultaneous roll and pitch0.03° RMS
Angle range Roll / Pitch± 30°
Heave Accuracy5cm or 5%
Acceleration accuracy0.01 m/s2 RMS
Comunication
Serial PortCom 1 : RS-232 Bi-Directional
Baud ratesSelectable (default 34800)
Output ratesSelectable 1- 200 Hz
ProtocolSelectable (default TSS1)
Other CommunicationSee the manual
Fisik
Dimensional (WxH)Ø134 x 127 mm exclude connector
Weight~1.5 kg
Housing materialTitanium
Environmental conditions
Operating temperature-20°C to +65°C, outside 0°C to +55°C, 0.1° angle performance
Storage temperature-40°C to +65°C
MTBF (mean time between failure, computed)50000 hours
Standard casingIP68,30 m depth rated
MountingHorizontal
Power Requirements
Power Requirements12 – 30 VDC, 3 W
Standard CompliesIEC 60945
