Ultra-High-Performance Liquid
Chromatography (UHPLC)
CAD/UV-Vis/Fluorescence

U-HPLC with UV-Vis/Fluorescence/CAD detector is an abbreviation for Ultra-High-performance liquid chromatography, an instrument for qualitative and quantitative analysis that can be detected with a Uv-Vis/Fluorescence/CAD detector. Samples received without preparation, without derivatization, and in the form of a solution will be filtered using a 0.2 µm syringe filter at the "Laboratorium Kawasan Yogyakarta".

Tool specifications:

• Pump: Dual Pump C (Quaternary, Flow range : 0.001–8 mL/min, in 1 μL/min increments; Pressure Range : 2–103 MPa (20–1034 bar, 290–15,000 psi)
• Autosampler with Cooler 4–40 °C (≥23 K below ambient at <80>
• Column type :
  • Hypersil GOLDTM (250 x 4.6 mm, particle size 5µ)
  • BDS HypersilTM C18 (150 x 4.6 mm, particle size 5µ)
• Detector
  • UV-VIS  (Variable Wavelength Detector C, 190-750 nm)
  • Fluorescence (Fluorescence Detector C with Dual-PMT)
  • CAD (Charged Aerosol Detector F with  Concentric Flow Nebulizer)

Usage Hours
Time : 08.00 - 15.00 WIB

Equipment reservations: on working days and hours (red dates/national holidays are not permitted)

Provision

1. Does not provide consumable materials (such as: syringe filters, glass vials, gloves, millipore membranes, tissues, and lab coats)
2. Standard target compounds and HPLC grade solvents are provided by the user
3. The sample is ready to run and filtered with a 0.2 µm syringe filter
4. The solution was put into a 2 mL HPLC vial
5. The time for using the instrument is calculated from conditioning until the instrument is turned off at a maximum of 15.00 WIB.
6. Please write usage hours in the submission description. If the application does not include information on usage hours, the service will be REFUSED
7. Please adjust the hours for using the equipment, if it exceeds the hours selected then please submit a reschedule.
8. Solvent preparation from the user can be carried out at Laboratorium Kawasan Yogyakarta one (1) day before operating the equipment.
9. The tool operator helps with the technical use of the tool
10. The method and analysis results of the UHLPC tool are the full responsibility of the user

Sample requirements
The sample is ready for injection and there is no sediment in the solvent

Sample delivery address:
Laboratorium Kawasan Yogyakarta
Kawasan Sains Umar Anggara Jenie BRIN, Jl. Jogja-Wonosari km 31,5, Desa Gading, Kec. Playen, Gunungkidul – Yogyakarta 55861

For further information, please contact us on WA number +628119811586

Application Requirements:

• Photo
• Other Supporting File

File Name	File Size
Service SOP file	0.23 MB
Template Photo	0 MB
Template Other Supporting File	0 MB